If your turntable will accept a 12 inch arm the performance difference will be very apparent.
10 inch vs 12 inch vinyl.
Say you have a 10 inch saw that spins at 5000 rpm like the dewalt dw713.
The new product was a 12 or 10 inch 30 or 25 cm fine grooved disc made of pvc vinyl and played with a smaller tipped microgroove stylus at a speed of 33 1 3 rpm.
This allows for louder levels to be cut on the disc by the mastering engineer which in.
When you are ready to move to a 12 inch arm look at any polytable or the merrill williams.
Most commonly this will be a 12 inch record but it s occasionally a 10 inch record.
First of all both 7 and 12 inch records can be either 45 rpm or 33 3 rpm.
At 33 rpm they hold around 12 15 minutes per side.
At 45 rpm they hold around 9 12 minutes per side.
Each side of a 12 inch lp could play for about 22 minutes.
Today though we ll examine the issue of 10 inch vs 12 inch miter saws so you can see which would work best for you depending on what you want to do with your saw.
10 inch vinyl records are great for shorter length ep albums.
One overlooked aspect of 9 versus 12 the effect of the 12 inch arms shallower offset angle creating less skating force.
Get your vinyl records pressed with dms.
12 inch models tend to spin slower because the blades have a larger radius.
Turn your tunes into 7 10 or 12 vinyl.
One significant advantage 10 inch miter saws have over 12 inch models is that they typically spin faster.
Although you can get compact 7 inch or 8 inch miter saws and even a 15 incher in the form of the mighty hitachi c15fb by far the most popular sizes are the 10 inch and 12 inch.
And 7 inch records don t necessarily have a larger spindle hole either.
The twelve inch single often written as 12 inch or 12 is a type of vinyl polyvinyl chloride or pvc gramophone record that has wider groove spacing and shorter playing time with a single or a few related sound tracks on each surface compared to lps long play which have several songs on each side.
The other common format is the 7 inch record which spins at 45 rpm and generally only fits one song per side.
Over 15 minutes per side is possible but may require further adjustments to eq and or levels for it all to fit nicely and sound.
It will run at about the same speed as a 12 inch saw that spins at 4000 rpm.
It s not really an issue of what s best in virtually every case a certain recording will only be available in one format of vinyl record.
Low prices fast turnaround 5 rated global shipping trading in uk 15 yrs.